As an Amazon Associate I earn from qualifying purchases.
Step 2: put coffee in the filter paper cone. Refer to brewing instructions for remaining steps. Fits all chemex coffeemakers except CM-1, CM-1C, CM-1GH.

Step 3: put coffee in the filter paper cone. Place your finger between the 3rd and 4th layer and open into a funnel. Thicker: 20-30% thicker than the competition, oils, specialty fiber filter design keep bitter elements, and grounds in their place and out of your cup.

Use one heaping tablespoon per cup of coffee adjust to personal taste if needed after first brew. Step 1: fold the chemex filter in half. Refer to brewing instructions for remaining steps. Step 2: place the funnel in the top portion of the chemex coffeemaker, with 3 layers on the groove side.

Refer to brewing instructions for remaining steps. Thicker: 20-30% thicker than the competition, oils, specialty fiber filter design keep bitter elements, and grounds in their place and out of your cup. Place your finger between the 3rd and 4th layer and open into a funnel.




Fits all chemex coffeemakers except CM-1, CM-1C, CM-1GH. Use one heaping tablespoon per cup of coffee adjust to personal taste if needed after first brew.

Fits all chemex coffeemakers except CM-1, CM-1C, CM-1GH. Step 1: fold the chemex filter in half. Then fold in half again, bringing the two corners together. The groove is an air vent and also the pouring spout and allows air to escape from the lower portion of the coffeemaker, letting the coffee filter.
1. Chemex
#ad
Exclusive Packaging, Natural Square, Chemex Bonded Filter, 100 ct
#adChemex #ad - Step 1: place the funnel in the top portion of the chemex coffeemaker, with 3 layers on the groove side. Use one heaping tablespoon per cup of coffee adjust to personal taste if needed after first brew.Step 2: put coffee in the filter paper cone. Refer to brewing instructions for remaining steps. Fits all chemex coffeemakers except CM-1, CM-1C, CM-1GH.
More information #ad
Thicker: 20-30 percent thicker than the competition, specialty fiber filter design keep bitter elements, oils, and grounds in their place and out of your cup. The groove is an air vent and also the pouring spout and allows air to escape from the lower portion of the coffeemaker, letting the coffee filter.Brand | Chemex #ad |
Manufacturer | Chemex #ad |
Height | 1 Inches |
Length | 12.99 Inches |
Weight | 1 Pounds |
Width | 6 Inches |
Part Number | FSU-100 |
Model | FSU-100 |
Warranty | Warranty |
More information #ad
2. Chemex
#ad
Chemex Filter, Natural Square, 100 CT, 2 Pack
#adChemex #ad - The groove is an air vent and also the pouring spout and allows air to escape from the lower portion of the coffeemaker, letting the coffee filter. Use one heaping tablespoon per cup of coffee adjust to personal taste if needed after first brew.Step 3: put coffee in the filter paper cone. Place your finger between the 3rd and 4th layer and open into a funnel. Thicker: 20-30% thicker than the competition, oils, specialty fiber filter design keep bitter elements, and grounds in their place and out of your cup.
More information #ad
Fits all chemex coffeemakers except CM-1, CM-1C, CM-1GH. Step 1: fold the chemex filter in half. Refer to brewing instructions for remaining steps. Step 2: place the funnel in the top portion of the chemex coffeemaker, with 3 layers on the groove side. Then fold in half again, bringing the two corners together.Brand | Chemex #ad |
Manufacturer | Chemex #ad |
Height | 5 Inches |
Length | 13 Inches |
Weight | 2.6 Pounds |
Width | 6.5 Inches |
Part Number | FSU-100 |
Model | FS-100 |
More information #ad
3. Chemex
#ad
Chemex Filter, Natural Square, 100 CT
#adChemex #ad - Thicker: 20-30% thicker than the competition, specialty fiber filter design keep bitter elements, oils, and grounds in their place and out of your cup. Then fold in half again, bringing the two corners together.Use one heaping tablespoon per cup of coffee adjust to personal taste if needed after first brew. Step 1: fold the chemex filter in half. Refer to brewing instructions for remaining steps. Step 2: place the funnel in the top portion of the chemex coffeemaker, with 3 layers on the groove side.
More information #ad
The groove is an air vent and also the pouring spout and allows air to escape from the lower portion of the coffeemaker, letting the coffee filter. Step 3: put coffee in the filter paper cone. Place your finger between the 3rd and 4th layer and open into a funnel. Fits all chemex coffeemakers except CM-1, CM-1C, CM-1GH.Brand | Chemex #ad |
Manufacturer | Chemex #ad |
Height | 6 Inches |
Length | 6 Inches |
Weight | 1 Pounds |
Width | 4.5 Inches |
Part Number | FSU-100 |
Model | FSU-100 |
More information #ad
4. Chemex
#ad
100 CT, FP-2N, Natural Half Moon, Chemex Filter
#adChemex #ad - Step 3: put coffee in the filter paper cone. Then fold in half again, bringing the two corners together. Use one heaping tablespoon per cup of coffee adjust to personal taste if needed after first brew.Refer to brewing instructions for remaining steps. Thicker: 20-30% thicker than the competition, oils, specialty fiber filter design keep bitter elements, and grounds in their place and out of your cup. Place your finger between the 3rd and 4th layer and open into a funnel.
More information #ad
Step 2: place the funnel in the top portion of the chemex coffeemaker, with 3 layers on the groove side. The groove is an air vent and also the pouring spout and allows air to escape from the lower portion of the coffeemaker, letting the coffee filter. Fits chemex coffeemakers cm-1, CM-1C, CM-1GH. Step 1: fold the chemex filter in half.Brand | Chemex #ad |
Manufacturer | Chemex #ad |
Part Number | FP-2N_SML |
Model | FP-2N_SML |
More information #ad
5. Chemex
#ad
Set of 200, Chemex Bonded Pre-folded Unbleached Square Coffee Filters
#adChemex #ad - Fits all chemex coffee makers except CM-1, CM-1C, CM-1GH. Assures uniform extraction since the water filters through all the grounds on its way to the apex of the cone.More information #ad
Enjoy bold and rich flavors of your favorite coffee grounds. Chemex filters are 20-30 percent heavier than competitive brands. Paper bonded construction.Brand | Chemex #ad |
Manufacturer | Chemex #ad |
Part Number | 575056-FSU-100 |
More information #ad
6. Chemex
#ad
100 Count, Chemex Bonded Unbleached Pre-Folded Square Coffee Filters, Set of 4
#adChemex #ad - Assures uniformed extraction since the water filters through all the grounds on its way to the apex of the cone. Disposable. Fits all chemex coffee makers except CM-1, CM-1C, SM-1GH. Come 20-30% heavier and guaranteed not to burst. Made in the USA.More information #ad
Brand | Chemex #ad |
Manufacturer | Chemex #ad |
Part Number | 626202-FSU-100 |
More information #ad
7. Chemex
#ad
Natural Square, 3 Pack, 100 ct, CHEMEX Bonded Filter, Exclusive Packaging
#adChemex #ad - Assures uniform extraction since the water filters through all the grounds on its way to the apex of the cone. Fits all chemex coffee makers except CM-1, CM-1C, CM-1GH. Paper bonded construction. Enjoy bold and rich flavors of your favorite coffee grounds.More information #ad
Brand | Chemex #ad |
Manufacturer | Chemex #ad |
Weight | 3.86 Pounds |
Part Number | 43237-2 |
More information #ad
8. Chemex
#ad
Exclusive Packaging, Chemex Classic Coffee Filters, Squares, 100 ct
#adChemex #ad - Step 1: place the funnel in the top portion of the chemex coffeemaker, with 3 layers on the groove side. Thicker: 20-30% thicker than the competition, oils, specialty fiber filter design keep bitter elements, and grounds in their place and out of your cup.Fits all chemex coffeemakers except CM-1, CM-1C, CM-1GH. Use one heaping tablespoon per cup of coffee adjust to personal taste if needed after first brew.
More information #ad
Refer to brewing instructions for remaining steps. The groove is an air vent and also the pouring spout and allows air to escape from the lower portion of the coffeemaker, letting the coffee filter. Fits all chemex coffeemakers except CM-1, CM-1C, CM-1GH. Step 2: put coffee in the filter paper cone.Brand | Chemex #ad |
Manufacturer | Chemex Coffee Maker #ad |
Height | 6.25 Inches |
Length | 6.25 Inches |
Weight | 1.2 Pounds |
Width | 4.5 Inches |
Part Number | E038168H |
Model | FS-100 |
Warranty | Warranty |
More information #ad
9. Chemex
#ad
Circle, Exclusive Packaging, Chemex Bonded Filter, 100 ct
#adChemex #ad - Refer to brewing instructions for remaining steps. Place your finger between the 3rd and 4th layer and open into a funnel. Step 3: put coffee in the filter paper cone.Fits all chemex coffeemakers except CM-1, CM-1C, CM-1GH. Step 1: fold the chemex filter in half. Then fold in half again, bringing the two corners together. The groove is an air vent and also the pouring spout and allows air to escape from the lower portion of the coffeemaker, letting the coffee filter.
More information #ad
Thicker: 20-30% thicker than the competition, oils, specialty fiber filter design keep bitter elements, and grounds in their place and out of your cup. Step 2: place the funnel in the top portion of the chemex coffeemaker, with 3 layers on the groove side. Use one heaping tablespoon per cup of coffee adjust to personal taste if needed after first brew.Brand | Chemex #ad |
Manufacturer | Chemex Coffee Maker #ad |
Height | 1.01 Inches |
Length | 6.38 Inches |
Weight | 1.01 Pounds |
Width | 4.49 Inches |
Part Number | FC100 |
Model | FC-100 |
Warranty | Warranty |
More information #ad