Side Shooter LED Lights Auto Power Plus 2Pcs 4 Inch 90W Cube Side Shot Pods Off Road Light Pods Dual Row Work Light Bar IP 68 Waterproof Driving Fog Lights


Auto Power Plus 1 - Incredible brightness - the led cube lights with high-quality cree led chips loaded in a 2x3 pattern and additional 4pcs LEDs on both outer sides, the side shooters are available to pumping out 90 watts and 9, 000 lumens of 6000k cool white super bright light that able to light up the entire front road.

Broad illuminate range - the forward-facing leds produce 121-degrees driving optics, the spot flood combo beam for further and broader illuminate area and pair of side-shooting LEDs on both outer sides for add 30-degrees wide coverage that are able to see from left to right clearly. Ip68 protection - the side shooter pod lights with high quality aluminum alloy rugged design are built-in rubber silicone seal pads for 99% waterproof, rustproof and anti-corrosive, which can efficiently resist moisture for durability in any harsh weather conditions.

Side Shooter LED Lights Auto Power Plus 2Pcs 4 Inch 90W Cube Side Shot Pods Off Road Light Pods Dual Row Work Light Bar IP 68 Waterproof Driving Fog Lights - Rugged construction - the led work light are protected by aircraft aluminum die-cast housing treated with corrosion prevention to handle the harshest environment. Also built-in over-sized heat sinks to keep the working temperature down and allow the LED's to run cooler and brighter. Add to cart - widely fit for all dc 9-32v vehicle and other device for far and wide coverage! We provide a FREE REPLACEMENT POLICY without any costs from your side and 2 Years Warranty, totally NO RISK for you!

More information about Auto Power Plus 1

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-Off Rocker Switch Blue1Lead


MICTUNING H408011 - Package included:1 x wiring harness with 5pin rocker switch, 1 x Diagram. Turn on on/off button of switch to test the lights bar. Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; If let the wire short circuit, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 300W, the harness would melt and even caught a fire, or it would got melt as well.

What you'll get: 1 yr mictuniNG Warranty and lifetime Friendly Customer Service. Both of them are genuine products, please used rest-assured. Our packing is being upgraded, so you may receive the wiring harness in the old packing. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars. Great construction Quality wiring material - UL approved.

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-Off Rocker Switch Blue1Lead - Mictuning heavy duty 1 lead wiring harness with on/off rocker switch and easy to install. It is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. Mictuning heavy duty 1 lead wiring harness is designed and made specifically for high output light bars which has substantially higher amperage draw than its smaller counterparts.

10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want. Cautions:we recommend professional installation, the harness would melt and even caught a fire, pls let professinal installer to wire the harness kit; If let the wire short circuit, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 300W, or it would got melt as well.

More information about MICTUNING H408011


Similar products



MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue2Lead


MICTUNING H608011 - Quick & easy Install 1. Our packing is being upgraded, so you may receive the wiring harness in the old packing. Both of them are genuine products, please used rest-assured. Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w.

Great construction: 40a power relay and inline blade fuse for multiple safety protection. It is 2 lead that with 2 lights output connection, it can hook with 1 heavy duty off road led light bar above 180w and two small light bar. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue2Lead - Cautions:we recommend professional installation, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 300W, pls let professinal installer to wire the harness kit; If let the wire short circuit, the harness would melt and even caught a fire, or it would got melt as well.

Turn on on/off button of switch to test the lights bar. Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w. Great construction: 40a power relay and inline blade Fuse for multiple safety protection.

It is 1 lead that with one lights output connection, it can hook with 1 heavy duty off road led light bar above 180w.

More information about MICTUNING H608011


Similar products



2014-2020 Toyota Tundra LED Pod Hood Mount Brackets


Cali Raised LED 5823963841 - Both of them are genuine products, please used rest-assured. Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w. Great construction: 40a power relay and inline blade fuse for multiple safety protection.

It is 2 lead that with 2 lights output connection, it can hook with 1 heavy duty off road led light bar above 180w and two small light bar. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want. Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; If let the wire short circuit, the harness would melt and even caught a fire, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 300W, or it would got melt as well.

2014-2020 Toyota Tundra LED Pod Hood Mount Brackets - Bolt on Easy Install. Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w. Great construction: 40a power relay and inline blade Fuse for multiple safety protection. It is 1 lead that with one lights output connection, it can hook with 1 heavy duty off road led light bar above 180w.

Made in USA. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.

More information about Cali Raised LED 5823963841


Similar products



for Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-Friendly


LAMPHUS 5823927098 - Driver and Passenger Side Included. Simplify led light bar installations on your roof rack, bull bar, or headache rackThe LAMPHUS Cruizer Horizontal Bar Clamp Mounting Kit makes installing Cruizer off-road light bars or other light bars with 10mm mounting screws onto your roof rack, bull bar, or headache rack a breeze.

Add more lights, bull bar, roll cage, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, or headache rack. Almost endless applications- can be used on tubes measuring 1", jeeps, trucks, atvs, utvs, 1.

75" & 2" in diameter; perfect for off-road vehicles, 1. 5", boats, farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

for Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-Friendly - Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped. Both of them are genuine products, please used rest-assured. Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity.

More information about LAMPHUS 5823927098


Similar products



MICTUNING MIC-LSR12 5Pin Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue


MICTUNING MIC-LSR12 - Surface size is 2" 50mm x 1"25mm. No affect on the opening Or Closing Of The Hood. Fashion cool illuminated rocker switch mictuning 5 pin rocker switch is a SPST Single Pole Single Throw on-off switch that works like a seesaw, easily turning on or off any lights. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.

Cautions:we recommend professional installation, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 300W, the harness would melt and even caught a fire, pls let professinal installer to wire the harness kit; If let the wire short circuit, or it would got melt as well.

MICTUNING MIC-LSR12 5Pin Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue - Mictuning heavy duty 2 lead wiring harness with on/off rocker switch and easy to install. Our packing is being upgraded, so you may receive the wiring harness in the old packing. Warranty 1 year quality guarantee for genuine mictuning 5 Pin Rocker Switch and Lifetime Friendly Customer Service. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, UTV, Off-road, ATV, Motorsport, Polaris RZR, Jeep Wrangler, Boat, Marine, Polaris Ranger RZR, SUV, etc.

Rated at 20amp 12v/dc and 10amp 24v/dc, work lights, tail lamps, boat and yacht, headlights, such as led light bar, it is mainly used for controlling the LED light fixtures of car, fog lights, auxiliary lights and so on. Its surface cover is designed to be streamline curved with etched patterns. Lights.

More information about MICTUNING MIC-LSR12


Similar products



MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch


MICTUNING MIC-B1002 - Package included:1 x wiring harness full wiring kit, 1 x Diagram. Illuminated on/off toggle switch - can easily turn on/off the lights. For light bar above 180w, we recommend you choose our MICTUNING Heavy DutyHD wiring harness for better job. Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity.

It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w. Great construction: 40a power relay and inline blade Fuse for multiple safety protection. It is 1 lead that with one lights output connection, it can hook with 1 heavy duty off road led light bar above 180w. Both of them are genuine products, please used rest-assured.

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch - Connect the white+;black- wire from the relay to light barred/black correspond to the wire of lights bar ; 3. Turn on on/off button of switch to test the lights bar. Quick & easy Install 1. Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment.

Powder Coated Black. What you'll get: 1 yr mictuniNG Warranty and lifetime Friendly Customer Service. Universal fit - compatible with all automobiles, Boats and devices equipped with a 10-30v power source.

More information about MICTUNING MIC-B1002


Similar products



ASD Custom Side Pillar Metal LED Light Mounting Bracket for POLARIS RZR XP 1000 900


ASD-CN 5823963652 - Single pole single Throw ON-OFF Switch. Both of them are genuine products, please used rest-assured. Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w. Great construction: 40a power relay and inline blade fuse for multiple safety protection.

It is 2 lead that with 2 lights output connection, it can hook with 1 heavy duty off road led light bar above 180w and two small light bar. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want. Cautions:we recommend professional installation, the harness would melt and even caught a fire, pls let professinal installer to wire the harness kit; If let the wire short circuit, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 300W, or it would got melt as well.

ASD Custom Side Pillar Metal LED Light Mounting Bracket for POLARIS RZR XP 1000 900 - Bolt on Easy Install. Our packing is being upgraded, so you may receive the wiring harness in the old packing. Fitments polaris rzr xp 1000 2014-2017 & rzr 900 2015-2017. Package: 1 pair a pillar Bracket Mounts Does not come with LED work lights. Provided installation hardware ensures secure mounting of the LED light to your vehicle.

Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, bull bar, or headache rack.

More information about ASD-CN 5823963652


Similar products



EAG 07-18 Jeep JK LED Light Windshield Mount Corner Relocate Brackets Kit


EAG - Etched with two l. E. D. Item included: 2 pieces mount brackets + mounting hardwareMaterials: Durable 1/8" steel sheet. Durable black textured powder coat finish. Allow to mount 1 small LED driving lights each side. Utilizing the factory mounting locations and screw, no drilling required. Rubber padded back-plate for vehicle paint protection and a firmer mount.

Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w. Great construction:40a power relay and inline blade fuse for multiple safety protection.

EAG 07-18 Jeep JK LED Light Windshield Mount Corner Relocate Brackets Kit - With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want. Cautions:we recommend professional installation, the harness would melt and even caught a fire, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, pls let professinal installer to wire the harness kit; If let the wire short circuit, or it would got melt as well.

Material: stainless steel; Color: Black powder coating. All symbols are etched directly onto the switch face to ensure long image life. Black hard surface rocker.

More information about EAG


Similar products



DJI4X4 Rear Lights Rocker Switch Laser Light Toggle Switch On-Off Button 5 Pins Blue LED Light 20A 12V


DJI 4X4 - All symbols are etched directly onto the switch face to ensure long image life. Black hard surface rocker. No affect on the opening Or Closing Of The Hood. Etched with two l. E. D. Powder Coated Black. Mounting Hole 1. 4 x 086 inch 36 x 22mm. Quality guarantee12 Months Quality Guarantee and Friendly Customer Service. Package inside:1 x 5 Pins Rocker Switch.

Both of them are genuine products, please used rest-assured. Driver and Passenger Side Included. Lights. Durable black textured powder coat finish. Allow to mount 1 small LED driving lights each side. Utilizing the factory mounting locations and screw, no drilling required. Rubber padded back-plate for vehicle paint protection and a firmer mount.

DJI4X4 Rear Lights Rocker Switch Laser Light Toggle Switch On-Off Button 5 Pins Blue LED Light 20A 12V - 5 pins on-off rocker switch - build in two blue light is sustain lighting up when the car power on that is useful to find out the rocker switch. Clean control table - if you could not bear the mess control table, Single pole single throw, the switch will be your first choice and bring factory look. Add more lights, bull bar, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, or headache rack.

Almost endless applications- can be used on tubes measuring 1", jeeps, trucks, utvs, atvs, 1.

More information about DJI 4X4


Similar products



GS Power's Jeep JK A-Pillar Windshield Hinge Mount Brackets 2 pcs for Mounting Auxiliary Off-Road LED, HID, or Halogen Fog and Work Lights to 2007-2018 Jeep Wrangler JK


GS Power LM-JKAS-2 - Our packing is being upgraded, so you may receive the wiring harness in the old packing. Easy Installation. Driver and Passenger Side Included. Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack.

Almost endless applications- can be used on tubes measuring 1", atvs, trucks, jeeps, utvs, 1.75" & 2" in diameter; perfect for off-road vehicles, 1. 5", boats, farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

GS Power's Jeep JK A-Pillar Windshield Hinge Mount Brackets 2 pcs for Mounting Auxiliary Off-Road LED, HID, or Halogen Fog and Work Lights to 2007-2018 Jeep Wrangler JK - Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped. 5pin 20 amp 12 volt on-off rocker switch With USER MANUAL. Fitment: 2007 jeep wrangler jk 2008 jeep wrangler jk 2009 jeep wrangler jk 2010 jeep wrangler jk 2011 jeep wrangler jk 2012 jeep wrangler jk 2013 jeep wrangler jk 2014 jeep Wrangler JK 2015 Jeep Wrangler JK 2016 Jeep Wrangler JK 2017 Jeep Wrangler JK 2018 Jeep Wrangler JK Package Includes: One Pair 2 pieces, left/right of A-pillar mount brackets.

10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want. Cautions:we recommend professional installation, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 300W, pls let professinal installer to wire the harness kit; If let the wire short circuit, the harness would melt and even caught a fire, or it would got melt as well.

More information about GS Power LM-JKAS-2


Similar products