Drillpro 4×4” Scientific Lab Jack Aluminum Lab Lifting Platform Stand Rack Scissor Lab-Lift Lifter


Drillpro DRILLPROTSZYmall2798 - Purpose: lift for regulating the height position of the object A support apparatus For physical, chemical, biological experiments lift the object or instrument. How to use: lift place a smooth, rotating the hand wheel to lift on the front panel can be adjusted to the desired height. Structure: experimental lift by the panel, under the floor and the rotating shaft, handwheel and other components.

How to use: lift place a smooth, rotating the hand wheel to lift on the front panel can be adjusted to the desired height. Maintenance: after use, dry, should be kept clean and stored in a cool, non-corrosive gases. Material: Stainless steel. Specifications: material: stainless steel measurements: countertop 100x100mm, under the floor and the rotating shaft, lowest 45mm Structure: Experimental lift by the panel, the highest 160mm, handwheel and other components.

Drillpro 4x4'' Scientific Lab Jack Aluminum Lab Lifting Platform Stand Rack Scissor Lab-Lift Lifter - Maintenance: after use, should be kept clean and stored in a cool, dry, the highest 160mm, non-corrosive gases Package include: 1x Laboratory lifting platform Measurements: countertop 100x100mm, lowest 45mm.

More information about Drillpro DRILLPROTSZYmall2798

Lucksender 2pcs 110*60mm Laboratory Flask Cork Stand Lab Supply Article


Lucksender - With approx. Description 110*60mm laboratory flask Cork Stand Lab Supply Article Applied to make a flask stand to prevent falling. 30mm thickness. 30mm thickness. Specifications material: cork flask Capacity: 250-1000ml Height: 30mm Inside Diameter: approx. 60mm outside Diameter: approx. 110mm package included 2 x Flask Stand Applied to make a flask stand to prevent falling.

Waterproof and acid-alkli resistant. With approx. Waterproof and acid-alkli resistant.

More information about Lucksender


Similar products



Eisco Labs Clamp Retort, 3 PVC Coated Prongs opens to 90mm in dia. with Boss Head


EISCO CH0688 - 30mm thickness. Pvc coated jaws open to 3. 5" or 90mm. Can mount vertical or horizontal -- rotates on clamp. Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant. With approx. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Extends out approximately 5" from rod, not adjustable. Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter. Attaches to rods up to 15mm in diameter. Jaws have a capacity of 90 mm.

More information about EISCO CH0688


Similar products



Laboratory Grade Metalware Set - Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia


EISCO - Can mount vertical or horizontal -- rotates on clamp. Attaches to rods up to 15mm in diameter. Metal retort ring 2. 5" diameter. Laboratory grade metalware set - support Stand 8" x 5", Rod 24" L, Burette Clamp and Retort Ring 2. 5" dia1 base, 1 rod, 1 clamp, 1 burette clamp, rod clamp and ring, 1 Retort ringThis premium set includes a stand, all in one packages - eliminating the need to piece together a system for your classroom or lab.

Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable. Made from high-quality metal and built to last. Everything is in one box. 30mm thickness. Pvc coated jaws open to 3.

Laboratory Grade Metalware Set - Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - 5" or 90mm. Stainless steel rod 24" length. Perfect setup for a lab. Stainless steel rod with a powder coated base provides the perfect setup for any experiment. Applied to make a flask stand to prevent falling.

More information about EISCO


Similar products



American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size


American Educational 7-G15-A - Can mount vertical or horizontal -- rotates on clamp. 30mm thickness. Pvc coated jaws open to 3. 5" or 90mm. Strong and dependable support. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Stainless steel rod 24" length. Base size: 8" length by 5" width, rod size: 3/8" diameter by 20" length. Perfect setup for a lab.

Metal retort ring 2. 5" diameter. Made of cast iron. The rods are nickel plated steel and are threaded to fit the base. Coated with an acid resistant finish. Attaches to rods up to 15mm in diameter. Available in cast iron. Strong and dependable support. 4 pronged, cork lined burette clamp. Applied to make a flask stand to prevent falling.

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size - Waterproof and acid-alkli resistant. With approx. The rods are nickel plated steel and are threaded to fit the base. Type is coated with an acid resistant finish.

More information about American Educational 7-G15-A


Similar products



Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2


Soccerene - Can mount vertical or horizontal -- rotates on clamp. Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant. With approx. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Give our product a try by ordering today. 30mm thickness. Pvc coated jaws open to 3. 5" or 90mm. Any problem about delivery, please contact Amazon Customer Service to solve it.

Guarantee:*your 100% satisfaction is our final goal, if you have any problem about the item, just feel free to contact us. Click add to cart today to get this wonderful accessory for your science project. 100% money back guarantee - We want you to be 100% Satisfied with your purchase. Stainless steel rod 24" length.

Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 - Perfect setup for a lab. 4 pronged, cork lined burette clamp. The rods are nickel plated steel and are threaded to fit the base. Strong and dependable support. Coated with an acid resistant finish. Absolutely no risk.

More information about Soccerene


Similar products



Dow Corning Vacuum Lubricant 5.3oz Tube


Dow Corning - 30mm thickness. Pvc coated jaws open to 3. 5" or 90mm. Coated with an acid resistant finish. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Lubricating o-rings in binoculars and telescopes. Made of cast iron. Low vapor pressure, stiff, no melting silicone lubricant maintains its consistency from -40° to +204°C -40° to +400°F.

Prevents fogging of delicate lenses. Sealing vacuum and pressure systems. Metal retort ring 2. 5" diameter. The rods are nickel plated steel and are threaded to fit the base. Resists oxidation and chemicals; no carbonaceous Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant. With approx.

Dow Corning Vacuum Lubricant 5.3oz Tube - Blue or black powder coated support stand base 8" x 5". 4 pronged, cork lined burette clamp. Strong and dependable support. Absolutely no risk. Can mount vertical or horizontal -- rotates on clamp. Designed for sealing and lubricating vacuum and pressure systems.

More information about Dow Corning


Similar products



OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip


OESS - Coated with an acid resistant finish. 30mm thickness. Pvc coated jaws open to 3. 5" or 90mm. Made of cast iron. 3 prong finger style rubber-coated Head lab clampBlack lab retort stand bosshead clamp holder Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant. With approx. Covered jaws for protection and grip.

Strong and dependable support. Sealing vacuum and pressure systems. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable. Metal retort ring 2. 5" diameter. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length.

OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip - Blue or black powder coated support stand base 8" x 5". Stainless steel rod 24" length. Can mount vertical or horizontal -- rotates on clamp. Lubricating o-rings in binoculars and telescopes. Attaches to rods up to 15mm in diameter.

More information about OESS


Similar products



7pcs PTFE magnetic stirrer mixer stir bar White Color


Hotodeal - Can mount vertical or horizontal -- rotates on clamp. Attaches to rods up to 15mm in diameter. These are brand new, never used, PTFE stirrer bars. Covered jaws for protection and grip. Ship by epacket with tracking number, take 7-17 days. Sold by Hotodeal. Maximum width of Jaw opening is 90mm. Sealing vacuum and pressure systems.

Flask support firmly holds 250-2000 mL round bottom flasks, and its outer diameter is 110 mm. The flask support is made of high quality cork, it has very good elasticity, strong heat and electrical insulation, friction resistance. Flask support is non-toxic, not easy to get fire, tasteless, small proportion, eco-friendly product.

7pcs PTFE magnetic stirrer mixer stir bar White Color - Perfect for holding your flasks or other spherical bottom containers from failing easily. 100% money back guarantee - we want you to be 100% Satisfied with your purchase. The rods are nickel plated steel and are threaded to fit the base. Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Extends out approximately 5" from rod, not adjustable. Blue or black powder coated support stand base 8" x 5".

More information about Hotodeal


Similar products



Laboy HMA012103-LB Thermometer Adapter Inlet Adapter with 24/40 Inner Joints for Distillation Apparatus


Beijing Chemduk Lab Equipment Co.,Ltd HMA012103-LB - With a compression cap accommodates 5. 0-7. 5mm O. D thermometer use it as a syringe port. Ship by epacket with tracking number, take 7-17 days. Sold by Hotodeal. With 24/40 inner joint. The rods are nickel plated steel and are threaded to fit the base. Made of cast iron. Prevents fogging of delicate lenses. These are brand new, never used, PTFE stirrer bars.

Pvc coating can withstand heat up to 100C for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable. Fit with thermometer or tubing. Lubricating o-rings in binoculars and telescopes. Metal retort ring 2. 5" diameter.

Laboy HMA012103-LB Thermometer Adapter Inlet Adapter with 24/40 Inner Joints for Distillation Apparatus - With 24/40 standard taper inner joint, can be fit for any apparatus with 24/40 outer joint. Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant. With approx. Sealing vacuum and pressure systems.

More information about Beijing Chemduk Lab Equipment Co.,Ltd HMA012103-LB


Similar products



HFS R Plate 8x8; Overall Height 10"; Lab Jack Scissor Stand Platform Lab Load Bearing 15kg/33lbs


HFS CECOMINOD087038 - Can mount vertical or horizontal -- rotates on clamp. Flask support firmly holds 250-2000 mL round bottom flasks, and its outer diameter is 110 mm. The flask support is made of high quality cork, strong heat and electrical insulation, it has very good elasticity, friction resistance. Flask support is non-toxic, tasteless, not easy to get fire, small proportion, eco-friendly product.

Perfect for holding your flasks or other spherical bottom containers from failing easily. 100% money back guarantee - we want you to be 100% Satisfied with your purchase. The rods are nickel plated steel and are threaded to fit the base. This 8x8" laboratory jack stand is an essential part of a busy lab. With a 7" range in motion and a easy to turn knob this stand will meet all of your needs.

HFS R Plate 8x8; Overall Height 10"; Lab Jack Scissor Stand Platform Lab Load Bearing 15kg/33lbs - Fit with thermometer or tubing. With a compression a cap. Stainless steel rod 24" length. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Absolutely no risk. Made of borosilicate glass. Applied to make a flask stand to prevent falling.

More information about HFS CECOMINOD087038


Similar products