Crescent CRW16 1/2″ Drive Flex Handle with 18″ Breaker Bar


Apex Tool Group CRW16 - Part of a 300+ piece open stock mechanics tool selection available from Crescent brand. The world famous crescent brand Presents the 1/2" Drive Flex Handle / Breaker Bar. Crescent, providing Quality Tools since 1907. Nickel chrome Plated for Long Lasting Protection. This tool meets new ansi and asME Specifications and Come with a Full Satisfaction Guarantee.

Chrome vanadium Alloy Steel for Maximum Strength.

More information about Apex Tool Group CRW16

EPAuto 1/2-Inch Drive Impact Socket Extension Bar Set, Cr-V, 3 Pieces


EPAuto ST-007-1 - Make in Taiwan. Made in taiwan package includes: 3 × 1/2 inch drive impact extension bar:    - 3 inches    - 6 inches    - 8 inches Durability: made from Hardened treated Chrome Vanadium Steel alloy Cr-V. Corrosion-retardant: Black Phosphate Coating. Locks onto drive tang.

More information about EPAuto ST-007-1


Similar products



TEKTON 4957 Impact Adapter and Reducer Set, Cr-V, 4-Piece


TEKTON 4957 - Make in Taiwan. Made from premium chrome vanadium steel, they are precisely heat treated for superior strength and protected by a corrosion-resistant black oxide finish. Set includes:1 3/8 in. Common size combinations multiply the range and capability of your socket system. Through-hole in drive ends locks onto drive tang.

Drive m adapter1 3/8 in. Drive m adapter durability: made from Hardened treated Chrome Vanadium Steel alloy Cr-V. Engineered for use with impact drivers. Drive f to 3/8 in. Drive m reducer1 1/2 in. Made of premium chrome vanadium steel with a protective black oxide finish. Locks onto drive tang. Engineered for use with impact drivers, these problem solvers give you more options for dealing with the unexpected.

TEKTON 4957 Impact Adapter and Reducer Set, Cr-V, 4-Piece - Drive m reducer1 1/4 in. They create solutions for lost or broken sockets, fill the gaps in incomplete size ranges, and extend the capability of your existing socket system. Impact adapter and Reducer Set. Drive f to 3/8 in. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped.

More information about TEKTON 4957


Similar products



TEKTON 24335 1/2" Drive Click Torque Wrench 10-150'.-Lb./13.6-203.5 Nm


Michigan Industrial Tools 24335 - Wrench emits click that can be heard and felt when the preset value is reached. High-contrast dual-range scale is easy to read, even in low light. Made of premium chrome vanadium steel with a protective black oxide finish. Built for consistent performance and years of dependable service, the mechanical design doesn't need batteries, and the allsteel construction has no plastic parts to break or wear out.

Important: this wrench is shipped precalibrated and ready to use. Reversible ratchet head drives in both directions and measures torque in clockwise direction. Correctly tightening fasteners to a vehicle or equipment manufacturer's torque specifications ensures parts are properly secured without being damaged.

TEKTON 24335 1/2" Drive Click Torque Wrench 10-150'.-Lb./13.6-203.5 Nm - When the preset torque value is reached, a reliable mechanical operation inside the handle produces a click you can hear and feel, alerting you to stop applying force. To measure torque, set the desired value on the handle scale foot pounds or Newton meters and begin tightening the fastener. Locks onto drive tang.

Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Simple and easy to use, this wrench has a reversible ratcheting head that drives fasteners in both directions and measures torque in the clockwise direction. Drive click torque wrench lets you work with confidence, eliminating guessing and the common tendency to overtighten fasteners.

Durable all-steel construction has no plastic parts to break or wear out.

More information about Michigan Industrial Tools 24335


Similar products



TEKTON 14260 1/2-Inch Drive by 21mm Deep Socket, Cr-V, 6-Point


TEKTON 14260 - Locks onto drive tang. Engineered for use with impact drivers. Wrench emits click that can be heard and felt when the preset value is reached. High-contrast dual-range scale is easy to read, even in low light. Make in Taiwan. Durable all-steel construction has no plastic parts to break or wear out. Made of premium chrome vanadium steel with a protective black oxide finish.

. Ships pre-calibrated to +/- 4% accuracy and ready to use. Extra-deep broach reaches over long, threaded shafts to access nuts. Advanced design grips flat sides of fastener heads, not corners, to prevent round off. Detent notches in drive end lock onto ratchets and extensions. Reversible ratchet head drives in both directions and measures torque in clockwise direction.

TEKTON 14260 1/2-Inch Drive by 21mm Deep Socket, Cr-V, 6-Point - Corrosion-retardant: Black Phosphate Coating. Common size combinations multiply the range and capability of your socket system. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Through-hole in drive ends locks onto drive tang. Made from premium chrome vanadium steel with a durable mirror chrome plated finish.

6-point opening snugly fits hex-shaped fastener heads to apply maximum torque without slipping.

More information about TEKTON 14260


Similar products



TEKTON 14385 Adapter and Reducer Set, 4-Piece


Michigan Industrial Tools 14385 - Wrench emits click that can be heard and felt when the preset value is reached. Engineered for use with impact drivers. Reversible ratchet head drives in both directions and measures torque in clockwise direction. Corrosion-retardant: Black Phosphate Coating. Tekton 14385 adapter and reducer set, 4-piece Durability: made from Hardened treated Chrome Vanadium Steel alloy Cr-V.

Ships pre-calibrated to +/- 4% accuracy and ready to use. Common size combinations multiply the range and capability of any socket set. Detent notches in drive end lock onto ratchets and extensions. Made of premium chrome vanadium steel with a protective black oxide finish. Make in Taiwan. Advanced design grips flat sides of fastener heads, not corners, to prevent round off.

TEKTON 14385 Adapter and Reducer Set, 4-Piece - Locks onto drive tang. Durable all-steel construction has no plastic parts to break or wear out. High-contrast dual-range scale is easy to read, even in low light. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Made of premium chrome vanadium steel with a mirror chrome finish.

More information about Michigan Industrial Tools 14385


Similar products



TEKTON 14259 1/2-Inch Drive by 19mm Deep Socket, Cr-V, 6-Point


TEKTON 14259 - Common size combinations multiply the range and capability of any socket set. Detent notches in drive end lock onto ratchets and extensions. Extra-deep broach reaches over long, threaded shafts to access nuts. Common size combinations multiply the range and capability of your socket system. Detent notches in drive end lock onto ratchets and extensions.

. Corrosion-retardant: Black Phosphate Coating. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Locks onto drive tang. 6-point opening snugly fits hex-shaped fastener heads to apply maximum torque without slipping. Make in Taiwan. Advanced design grips flat sides of fastener heads, not corners, to prevent round off.

TEKTON 14259 1/2-Inch Drive by 19mm Deep Socket, Cr-V, 6-Point - Tekton 14259 1/2-inch drive by 19mm deep socket, cr-v, 6-Point Durability: made from Hardened treated Chrome Vanadium Steel alloy Cr-V. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Made of premium chrome vanadium steel with a mirror chrome finish. Made of premium chrome vanadium steel with a protective black oxide finish.

High-contrast dual-range scale is easy to read, even in low light.

More information about TEKTON 14259


Similar products



EPAuto 1/2-inch Drive Click Torque Wrench, 10~150 ft./lb, 13.6~203.5 N/m


EPAuto ST-010-1 - Corrosion-retardant: Satin Finish. Locks onto drive tang. Accurate: pre-Calibrated to ± 4%. Detent notches in drive end lock onto ratchets and extensions. Made in taiwan specification: reversible ratchet head drives in both directions and measures torque in clockwise direction Ratchet: Cr-V, 24-tooth gear Drive: 1/2" Length: 18-1/4" Accuracy: ± 4% Increment: 1 ft.

Lb. Detent notches in drive ends lock onto ratchets and extensions. 6-point opening snugly fits hex-shaped fastener heads to apply maximum torque without slipping. Easy to read: high contrast & dual Range Scale. Corrosion-retardant: Black Phosphate Coating. Common size combinations multiply the range and capability of any socket set.

EPAuto 1/2-inch Drive Click Torque Wrench, 10~150 ft./lb, 13.6~203.5 N/m - Common size combinations multiply the range and capability of your socket system. Advanced design grips flat sides of fastener heads, not corners, to prevent round off. 13. 6 ~ 203. 5 n/m package includes: 1 × 1/2" drive torque wrench 1 × storage Case 1 × User Manual Durability: made from Hardened treated Chrome Vanadium Steel alloy Cr-V.

Non-slip Grip: Knurled handle.

More information about EPAuto ST-010-1


Similar products



Capri Tools 1/2 Inch Drive Extension Breaker Bar, 377 ft-lb, 24 inches


Capri Tools 40120 - Advanced design grips flat sides of fastener heads, not corners, to prevent round off. Make in Taiwan. Easy storage: a sturdy plastic storage case is included. Non-slip Grip: Knurled handle. Made of premium chrome vanadium steel with a protective black oxide finish. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped.

Reversible ratchet head drives in both directions and measures torque in clockwise direction. Wrench emits click that can be heard and felt when the preset value is reached. Advanced design grips flat sides of fastener heads, not corners, to prevent round off. Rotates 180 degrees for dynamic utilization in a variety of jobs.

Capri Tools 1/2 Inch Drive Extension Breaker Bar, 377 ft-lb, 24 inches - The head is rotatable 180 degrees to provide you with dynamic options for a variety of jobs. Corrosion-retardant: Black Phosphate Coating. Durable all-steel construction has no plastic parts to break or wear out. 6-point opening snugly fits hex-shaped fastener heads to apply maximum torque without slipping.

The sockets are kept firmly secure by the spring loaded ball bearing. Easy to read: high contrast & dual Range Scale. Absolute quality is guaranteed as it meets DIN standards and comes with a Capri Tools lifetime warranty.

More information about Capri Tools 40120


Similar products



TEKTON 14279 1/2-Inch Drive by 3/4-Inch Shallow Socket, Cr-V, 6-Point


TEKTON 14279 - Corrosion-retardant: Black Phosphate Coating. High-contrast dual-range scale is easy to read, even in low light. Durable all-steel construction has no plastic parts to break or wear out. Easy to read: high contrast & dual Range Scale. Detent notches in drive end lock onto ratchets and extensions. Detent notches in drive ends lock onto ratchets and extensions.

Locks onto drive tang. Detent notches in drive end lock onto ratchets and extensions. Engineered for use with impact drivers. Made from premium chrome vanadium steel with a durable mirror chrome plated finish. Made of premium chrome vanadium steel with a mirror chrome finish. Common size combinations multiply the range and capability of your socket system.

TEKTON 14279 1/2-Inch Drive by 3/4-Inch Shallow Socket, Cr-V, 6-Point - Durability: made from Hardened treated Chrome Vanadium Steel alloy Cr-V. Corrosion-retardant: Satin Finish. Simple and reliable: "click" sound tells the preset torque value is reached. To prevent round off, it grips the flat sides of fasteners rather than the corners. Sockets are securely held due to the spring loaded ball bearing.

Rotates 180 degrees for dynamic utilization in a variety of jobs.

More information about TEKTON 14279


Similar products



DEWALT 1/2" Drive Adapter 1/2" TO 3/8"


Dewalt DWMT86414B - Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Shallow well and slim walls allow socket to fit into tight, narrow spaces. Wrench emits click that can be heard and felt when the preset value is reached. Common size combinations multiply the range and capability of any socket set.

Durability: made from Hardened treated Chrome Vanadium Steel alloy Cr-V. Sockets are securely held due to the spring loaded ball bearing. Simple and reliable: "click" sound tells the preset torque value is reached. Made from premium chrome vanadium steel with a durable mirror chrome plated finish. Non-slip Grip: Knurled handle.

DEWALT 1/2" Drive Adapter 1/2" TO 3/8" - Extra-deep broach reaches over long, threaded shafts to access nuts. Advanced design grips flat sides of fastener heads, not corners, to prevent round off. Rotates 180 degrees for dynamic utilization in a variety of jobs. Corrosion-retardant: Black Phosphate Coating. Durable all-steel construction has no plastic parts to break or wear out.

Stop applying force when you hear and feel it. 1/2 inch drive, 24 inches long, 377 ft-lb capacity breaker bar.

More information about Dewalt DWMT86414B


Similar products