Aootech 32 Pack Brass Misting Nozzles for Outdoor Cooling System, 0.012” Orifice 0.3 mm 10/24 UNC


Aootech Aootech-6-5 - From the manufacturer this misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, low cost, good effect, excellent misting effect, energy and water saving, no leakage. The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.

The built-in stainless steel wafer through advanced forging process, strong durability, is 2. 5 times the life of similar nozzle. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging. A filter on your mist system is highly recommended.

Aootech 32 Pack Brass Misting Nozzles for Outdoor Cooling System, 0.012” Orifice 0.3 mm 10/24 UNC - Included in the package: 32 x brass misting Nozzles 32pcs brass misting nozzles for Outdoor Cooling System, Greenhouse, Landscaping and Dust Control. High quality: made of brass, never Rust. Nozzle can fully spray use the pressure of tap water. Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.

Plugged up Nozzles are not covered by any warranty. It is used a sturdy brass body with stainless steel orifice, cool down, widely used in dust removal, landscaping, artificial fog and other humidification place.

More information about Aootech Aootech-6-5

Orbit Arizona Mist 10115H 3/8-Inch Misting Brass Auto Drain Valve


Orbit Underground/Sunmate 10115H - Prevents premature mist nozzle clgging and prolongs the life of your misting system. High-quality brass construction. It is designed for installation in one of two ways: either thread it into a 10/24 female-threaded nozzle opening or insert it into any professional slip-lock fitting. Versatile installation: install in any fitting with a 10/24 female-threaded opening or at the end of any orbit slip-lok.

Easy to install. It operates as a siphon by drawing the water out of the system once it is no longer pressurized. The auto drain valve is used to drain water from the mist line when it is not in use. The mist auto drain valve is an essential component for any outdoor mist cooling system. 4 year warranty. When installed at low points in the mist line, it works with gravity and allows water to automatically drain from the line; this reduces nozzle clogging and prolongs the life of your mist system.

More information about Orbit Underground/Sunmate 10115H


Similar products



mistcooling 3/4" Inlet and Outlet Size Misting System Calcium Inhibitor Filter, 6 Month Life


Mistcooling 3/4 " Inlet and Outlet Size - Prevents premature mist nozzle clgging and prolongs the life of your misting system. Easy to install. This is a high-quality and easy to install 6x2 water filter model mc601 featuring 5 micron poly-phosphate filter that attaches smoothly and directly to your low and mid-pressure mist cooling systems/hose bibb.

The filter is designed for performance. Range: 40 - 100 f inlet connection: 3/4'' fht outlet connection: 3/4'' mht pressure Range: 20 125 PSI Gallons Per Minute: About 1 GPM Dimensions: 6" length x 2" diameter. Therefore, to improve quality of mist and performance of your misting nozzles, consider installing our Poly-Phosphate water filter.

With this water filter, the smaller the droplets, you can rest assured that your nozzles will remain free from clogging up to as long as 6 months. Micron rating: 5 temp. Filter media: poly phosphate filter life: about 2, rust, dirt, 000 gallons or 6 months Reduces: Chlorine as well as sediment, and other impurities down to 5 microns.

mistcooling 3/4" Inlet and Outlet Size Misting System Calcium Inhibitor Filter, 6 Month Life - 5 micron poly phosphate filter prevents clogging of mist nozzles 6 Months Life Easy installation Simply attaches to any Outdoor Spigot or garden hose. Nozzles installed in the mist cooling system often tend to reduce in performance and efficiency, typically because of excessive dirt, sediments, impurities and dust collection inside them, which usually occurs if you use hard water for misting.

Hard water is rich in mineral content which clogs nozzles. They swiftly breakdown the large water particles into millions of tiny droplets - and as you may know, the faster they are absorbed, thereby creating a cool zone immediately.

More information about Mistcooling 3/4 " Inlet and Outlet Size


Similar products



Orbit Arizona Mist 10103 Misting Nozzle Cleaner, 8-Ounce


Orbit Underground/Sunmate 10103 - Routine use for nozzle maintenance extends nozzle life. Versatile installation: install in any fitting with a 10/24 female-threaded opening or at the end of any orbit slip-lok. Filter media: poly phosphate filter life: about 2, rust, dirt, 000 gallons or 6 months Reduces: Chlorine as well as sediment, and other impurities down to 5 microns.

5 micron poly phosphate filter prevents clogging of mist nozzles 6 Months Life Easy installation Simply attaches to any Outdoor Spigot or garden hose. Gently soaks mineral deposits away. Rinse the nozzles before reinstalling. Easy to install. 4 year warranty. The orbit/arizona mist 8-ounce misting nozzle cleaner is formulated for use with all orbit/Arizona mist products.

Orbit Arizona Mist 10103 Misting Nozzle Cleaner, 8-Ounce - Safe, biodegradable, and non-toxic. For outdoor use only. It helps remove mineral content like sediments and impurities, as well as dust and dirt from the nozzles, ensuring your system nozzles remain unclogged and work with high efficiency. When the nozzles are clean and unclogged, they tend to work their best.

4 year warranty. This is a high-quality and easy to install 6x2 water filter model mc601 featuring 5 micron poly-phosphate filter that attaches smoothly and directly to your low and mid-pressure mist cooling systems/hose bibb.

More information about Orbit Underground/Sunmate 10103


Similar products



VERY100 Thread Misting Nozzle Tees 1/4" Slip-Lok with Nozzle Pack of 10, 1pc Plug for Cooling System Black


VERY100 23400064 - Easy to install. They swiftly breakdown the large water particles into millions of tiny droplets - and as you may know, the faster they are absorbed, thereby creating a cool zone immediately. 4 year warranty. For outdoor use only. Brass/ss 0012 inches03mm orifice, 10/24 threads misting nozzles 10pcs, stainless steel brass body, leak-proof, Self-sealing O-ring Including with each Nozzle;no Tape or Sealant is Required.

Operation pressure:20-80kg/cm, flow rate:80-145ml/min, minimal water use of 1/2 gallon of water Per Hour Per Nozzle, 10pcs Misting Nozzle and 10pcs Nozzle Tees and 1pc Plug, umbrella, best clogged mister nozzles replacement for DIY homemade low pressure greenhouse, patio mister systems, outdoor cooling systems.

VERY100 Thread Misting Nozzle Tees 1/4" Slip-Lok with Nozzle Pack of 10, 1pc Plug for Cooling System Black - Turn on the tap slightly until jets are working, enjoy the cooling misting system. Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time. Hard water, replace sediment filters not included, lime and calcium may clog the fogger nozzles, Clean nozzles periodically by soaking them in vinegar & warm water solution, Remove them at the end of the season.

Very popular is the application for refreshment playgrounds for children - lawns - pavilions - tents - campsites, but also in the animal breeding - animal husbandry there are many applications in the field of water wetting. Routine use for nozzle maintenance extends nozzle life. 4 year warranty. Range: 40 - 100 f inlet connection: 3/4'' fht outlet connection: 3/4'' mht pressure Range: 20 125 PSI Gallons Per Minute: About 1 GPM Dimensions: 6" length x 2" diameter.

More information about VERY100 23400064


Similar products



Orbit Arizona Mist 10107L Brass Misting Nozzle Plug, 3-Pack


Orbit Underground/Sunmate 10107L - High-quality brass construction. For outdoor use only. For outdoor use with cold water only. These plugs are used to replace nozzles in the off season when the mist system is not used and the mist nozzles are being stored. It helps remove mineral content like sediments and impurities, as well as dust and dirt from the nozzles, ensuring your system nozzles remain unclogged and work with high efficiency.

When the nozzles are clean and unclogged, they tend to work their best. High-quality brass construction. Brass/ss 0012 inches03mm orifice, 10/24 threads misting nozzles 10pcs, stainless steel brass body, leak-proof, Self-sealing O-ring Including with each Nozzle;no Tape or Sealant is Required. Operation pressure:20-80kg/cm, umbrella, patio mister systems, 10pcs misting nozzle and 10pcs nozzle Tees and 1pc Plug, Flow Rate:80-145ml/min, Minimal Water Use of 1/2 Gallon of Water Per Hour Per Nozzle, best clogged mister nozzles replacement for DIY homemade low pressure greenhouse, outdoor cooling systems.

Orbit Arizona Mist 10107L Brass Misting Nozzle Plug, 3-Pack - Turn on the tap slightly until jets are working, enjoy the cooling misting system. Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time. Hard water, lime and calcium may clog the fogger nozzles, Clean nozzles periodically by soaking them in vinegar & warm water solution, Replace sediment filters not included, Remove them at the end of the season.

Very popular is the application for refreshment playgrounds for children - lawns - pavilions - tents - campsites, but also in the animal breeding - animal husbandry there are many applications in the field of water wetting.

More information about Orbit Underground/Sunmate 10107L


Similar products



WaterSentinel WS-21 Calcium Inhibitor Filter and Misting System Protector


Water Sentinel WS-21 - For outdoor use only. High-quality brass construction. The carbon block has millions of active sites on its surface and within the structure which can absorb impurities like a sponge, and can absorb and hold other types of impurities on its surface like a magnet. Keeps your mist cooling system operating at peak performance.

Versatile installation: install in any fitting with a 10/24 female-threaded opening or at the end of any orbit slip-lok. This is a high-quality and easy to install 6x2 water filter model mc601 featuring 5 micron poly-phosphate filter that attaches smoothly and directly to your low and mid-pressure mist cooling systems/hose bibb.

WaterSentinel WS-21 Calcium Inhibitor Filter and Misting System Protector - The filter is designed for performance. Prolongs nozzle life by preventing scale buildup from clogging up. 4 year warranty. Additionally, this filter can catalytically breakdown other impurities very similar to the way a catalytic converter works in your automobile. For customer service call 866-218-8473 Prevents premature mist nozzle clgging and prolongs the life of your misting system.

High-quality brass construction. Quick, 1-step installation with the same OEM performances. Prolongs nozzle life by preventing scale buildup from clogging up. For use with all outdoor cooling systems.

More information about Water Sentinel WS-21


Similar products



Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H


Orbit 10056H - 4 year warranty. They swiftly breakdown the large water particles into millions of tiny droplets - and as you may know, the faster they are absorbed, thereby creating a cool zone immediately. The extension features a brass and Stainless Steel Mist that only uses one half gallon per hour per nozzle, making it the most water efficient nozzle available.

Quick, 1-step installation with the same OEM performances. Prolongs nozzle life by preventing scale buildup from clogging up. For use with all outdoor cooling systems. Watersentinel brand ensures the highest standard. 102 day warranty against manufacturer defects from date of sale with invoice from WaterSentinel.

Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H - Proudly manufactured in America with US based customer service. 4 year warranty. There are two features that make the 4" Extension so beneficial; first, it extends the mist spray another four in. Interchangeable - Screw into any 10/24 threaded mist nozzle opening. 5 pack size: 4" flexible mist nozzle extension 10/24 nozzle thread that can be used place of a standard mist nozzle extends the mist spray another 4" the mist line, wire memory allows the user to direct the mist wherever needed Useful on fixed fitting mist systems such the diy pvc mist system Brass & stainless steel mist that only uses 1/2 gallon per hour per nozzle Allows for directional adjustment of the mist on a rigid mist line Can be used to extend the misting nozzle around obstacles Interchangeable - screw into any 10/24 threaded mist nozzle opening Not for use on pressure boosted systems 160 PSI or above.

Keeps your mist cooling system operating at peak performance. It helps remove mineral content like sediments and impurities, as well as dust and dirt from the nozzles, ensuring your system nozzles remain unclogged and work with high efficiency.

More information about Orbit 10056H


Similar products



SYOOY 4 Hole Brass Spray Nozzle Misting Nozzles Garden Sprinklers Irrigation Fitting Water Connector 4 PCS


SYOOY - Package includes: 4*misting nozzles Prevents premature mist nozzle clgging and prolongs the life of your misting system. Filter media: poly phosphate filter life: about 2, 000 gallons or 6 months Reduces: Chlorine as well as sediment, dirt, rust, and other impurities down to 5 microns.5 micron poly phosphate filter prevents clogging of mist nozzles 6 Months Life Easy installation Simply attaches to any Outdoor Spigot or garden hose.

Gently soaks mineral deposits away. If the washer falls down, it can be rotated and tightened. With this water filter, the smaller the droplets, you can rest assured that your nozzles will remain free from clogging up to as long as 6 months. Micron rating: 5 temp. If you want to screw mister nozzle it into 1/2" PVC, you'll need to adapt this 1/4" fitting to 1/2" fitting to go into your preferred PVC fitting.

SYOOY 4 Hole Brass Spray Nozzle Misting Nozzles Garden Sprinklers Irrigation Fitting Water Connector 4 PCS - Safe, biodegradable, and non-toxic. For customer service call 866-218-8473. Proudly manufactured in America with US based customer service. This is a high-quality and easy to install 6x2 water filter model mc601 featuring 5 micron poly-phosphate filter that attaches smoothly and directly to your low and mid-pressure mist cooling systems/hose bibb.

The filter is designed for performance. They are actually 1/4" pipe thread.

More information about SYOOY


Similar products



Aero Mist 52505 Outdoor Calcium Inhibitor Filter


Aero Mist, Inc 52505 - If you want to screw mister nozzle it into 1/2" PVC, you'll need to adapt this 1/4" fitting to 1/2" fitting to go into your preferred PVC fitting. For use with low pressure misting systems only. Interchangeable - Screw into any 10/24 threaded mist nozzle opening. 4 year warranty. With this water filter, the smaller the droplets, you can rest assured that your nozzles will remain free from clogging up to as long as 6 months.

Micron rating: 5 temp. Perfect for all outdoor mist cooling systems. Range: 40 - 100 f inlet connection: 3/4'' fht outlet connection: 3/4'' mht pressure Range: 20 125 PSI Gallons Per Minute: About 1 GPM Dimensions: 6" length x 2" diameter. Easily connects to standard 3/4 inch garden hose or hose bibb.

Aero Mist 52505 Outdoor Calcium Inhibitor Filter - Easy to install. Quick, 1-step installation with the same OEM performances. Prolongs nozzle life by preventing scale buildup from clogging up. For use with all outdoor cooling systems. Watersentinel brand ensures the highest standard. 102 day warranty against manufacturer defects from date of sale with invoice from WaterSentinel.

They are actually 1/4" pipe thread.

More information about Aero Mist, Inc 52505


Similar products



Yotako Misting Nozzles Kit 12x Brass Mister Nozzles 0.3mm 10/24 UNC+ 10x 1/4'' Slip-Lok Misting Nozzle Tees+ 1x Plug, Fog Nozzles for Patio Misting System Outdoor Cooling System Garden Water Mister


Yotako - Its spray diameter is 1-3 meters. Application: suitable for courtyard, lawn, agricultural spray irrigation, greenhouse and other small area of sprinkler, garden, and other small area of roof cooling. Note: please note that checking the size is appropriate before purchasing. That is sturdy, lightweight and durable.

. For outdoor use only. Quick, 1-step installation with the same OEM performances. Prolongs nozzle life by preventing scale buildup from clogging up. For use with all outdoor cooling systems. Watersentinel brand ensures the highest standard. 102 day warranty against manufacturer defects from date of sale with invoice from WaterSentinel.

Can be used to extend the misting nozzle around obstacles. High-quality brass construction. Keeps your mist cooling system operating at peak performance. It helps remove mineral content like sediments and impurities, as well as dust and dirt from the nozzles, ensuring your system nozzles remain unclogged and work with high efficiency.

Yotako Misting Nozzles Kit 12x Brass Mister Nozzles 0.3mm 10/24 UNC+ 10x 1/4'' Slip-Lok Misting Nozzle Tees+ 1x Plug, Fog Nozzles for Patio Misting System Outdoor Cooling System Garden Water Mister - When the nozzles are clean and unclogged, they tend to work their best. High-quality brass construction. Renew misting set up】-- operation pressure: 20-70kg/cm, flow rate: 80-145ml/Min, umbrella, Working pressure: 30- 450PSI, best clogged mister nozzles replacement for DIY homemade low pressure greenhouse, patio mister systems, outdoor cooling systems.

More information about Yotako


Similar products